Script Works when run manually but SCCM Keeps Failing

cory · July 9, 2015, 3:30pm

The script looks like it run but then it gives an error from SCCM… Thoughts?

<#
.SYNOPSIS
	This script performs the installation or uninstallation of an application(s).
.DESCRIPTION
	The script is provided as a template to perform an install or uninstall of an application(s).
	The script either performs an "Install" deployment type or an "Uninstall" deployment type.
	The install deployment type is broken down into 3 main sections/phases: Pre-Install, Install, and Post-Install.
	The script dot-sources the AppDeployToolkitMain.ps1 script which contains the logic and functions required to install or uninstall an application.
.PARAMETER DeploymentType
	The type of deployment to perform. Default is: Install.
.PARAMETER DeployMode
	Specifies whether the installation should be run in Interactive, Silent, or NonInteractive mode. Default is: Interactive. Options: Interactive = Shows dialogs, Silent = No dialogs, NonInteractive = Very silent, i.e. no blocking apps. NonInteractive mode is automatically set if it is detected that the process is not user interactive.
.PARAMETER AllowRebootPassThru
	Allows the 3010 return code (requires restart) to be passed back to the parent process (e.g. SCCM) if detected from an installation. If 3010 is passed back to SCCM, a reboot prompt will be triggered.
.PARAMETER TerminalServerMode
	Changes to "user install mode" and back to "user execute mode" for installing/uninstalling applications for Remote Destkop Session Hosts/Citrix servers.
.PARAMETER DisableLogging
	Disables logging to file for the script. Default is: $false.
.EXAMPLE
	Deploy-Application.ps1
.EXAMPLE
	Deploy-Application.ps1 -DeployMode 'Silent'
.EXAMPLE
	Deploy-Application.ps1 -AllowRebootPassThru -AllowDefer
.EXAMPLE
	Deploy-Application.ps1 -DeploymentType Uninstall
.NOTES
	Toolkit Exit Code Ranges:
	60000 - 68999: Reserved for built-in exit codes in Deploy-Application.ps1, Deploy-Application.exe, and AppDeployToolkitMain.ps1
	69000 - 69999: Recommended for user customized exit codes in Deploy-Application.ps1
	70000 - 79999: Recommended for user customized exit codes in AppDeployToolkitExtensions.ps1
.LINK 
	http://psappdeploytoolkit.codeplex.com
#>
[CmdletBinding()]
Param (
	[Parameter(Mandatory=$false)]
	[ValidateSet('Install','Uninstall')]
	[string]$DeploymentType = 'Install',
	[Parameter(Mandatory=$false)]
	[ValidateSet('Interactive','Silent','NonInteractive')]
	[string]$DeployMode = 'Interactive',
	[Parameter(Mandatory=$false)]
	[switch]$AllowRebootPassThru = $true,
	[Parameter(Mandatory=$false)]
	[switch]$TerminalServerMode = $false,
	[Parameter(Mandatory=$false)]
	[switch]$DisableLogging = $false
)

Try {
	## Set the script execution policy for this process
	Try { Set-ExecutionPolicy -ExecutionPolicy 'ByPass' -Scope 'Process' -Force -ErrorAction 'Stop' } Catch {}

	
	##*===============================================
	##* VARIABLE DECLARATION
	##*===============================================
	## Variables: Application
	[string]$appVendor = 'Oracle'
	[string]$appName = 'SmartView_32-bit_for_Office'
	[string]$appVersion = '11.1.2.5.210'
	[string]$appArch = ''
	[string]$appLang = 'EN'
	[string]$appRevision = '01'
	[string]$appScriptVersion = '1.0.0'
	[string]$appScriptDate = '07/08/2015'
	[string]$appScriptAuthor = 'Cory Freeman'
	##*===============================================
	
	##* Do not modify section below
	#region DoNotModify
	
	## Variables: Exit Code
	[int32]$mainExitCode = 0
	
	## Variables: Script
	[string]$deployAppScriptFriendlyName = 'Deploy Application'
	[version]$deployAppScriptVersion = [version]'3.6.1'
	[string]$deployAppScriptDate = '03/26/2015'
	[hashtable]$deployAppScriptParameters = $psBoundParameters
	
	## Variables: Environment
	[string]$scriptDirectory = Split-Path -Path $MyInvocation.MyCommand.Definition -Parent
	
	## Dot source the required App Deploy Toolkit Functions
	Try {
		[string]$moduleAppDeployToolkitMain = "$scriptDirectory\AppDeployToolkit\AppDeployToolkitMain.ps1"
		If (-not (Test-Path -Path $moduleAppDeployToolkitMain -PathType Leaf)) { Throw "Module does not exist at the specified location [$moduleAppDeployToolkitMain]." }
		If ($DisableLogging) { . $moduleAppDeployToolkitMain -DisableLogging } Else { . $moduleAppDeployToolkitMain }
	}
	Catch {
		[int32]$mainExitCode = 60008
		Write-Error -Message "Module [$moduleAppDeployToolkitMain] failed to load: <code>n$($_.Exception.Message)</code>n

n$($_.InvocationInfo.PositionMessage)" -ErrorAction ‘Continue’
Exit $mainExitCode
}

#endregion
##* Do not modify section above
##*===============================================
##* END VARIABLE DECLARATION
##*===============================================
	
If ($deploymentType -ine 'Uninstall') {
	##*===============================================
	##* PRE-INSTALLATION
	##*===============================================
	[string]$installPhase = 'Pre-Installation'
			##Application Detection

If((Get-InstalledApplication ‘Oracle Smart View 32-bit for Office’ | Select “DisplayVersion” -ExpandProperty “DisplayVersion”)-eq “11.1.2.5.210”){
$MsgText = “$appVendor $appName $appVersion has already been installed.”
Show-InstallationPrompt -message “$MsgText” -ButtonRightText “OK” -Icon “Information” -MinimizeWindows $True -timeout 900
Exit-Script -ExitCode 0
}

	## Show Welcome Message, close Internet Explorer if required, allow up to 3 deferrals, verify there is enough disk space to complete the install, and persist the prompt 
	Show-InstallationWelcome -CloseApps 'excel=Microsoft Office Excel' -CloseAppsCountdown 600

	
	## Show Progress Message (with the default message)
	Show-InstallationProgress "Installing $appVendor $appName $appVersion "
	
	## &lt;Perform Pre-Installation tasks here&gt;
	
	
	##*===============================================
	##* INSTALLATION 
	##*===============================================
	[string]$installPhase = 'Installation'
	
	## Handle Zero-Config MSI Installations
	If ($useDefaultMsi) { Execute-MSI -Action 'Install' -Path $defaultMsiFile }
	
	## &lt;Perform Installation tasks here&gt;
	Execute-Process -Path 'Smartview.exe' -Parameters '/Office=32 /s /v"/qn /l*c C:\sv_silent_install.log INSTALLDIR=C:\Hyperion\SmartView"'
	
	
	##*===============================================
	##* POST-INSTALLATION
	##*===============================================
	[string]$installPhase = 'Post-Installation'
	
	## &lt;Perform Post-Installation tasks here&gt;
	
	## Display a message at the end of the install
	If (-not $useDefaultMsi) { Show-InstallationPrompt -Message 'Oracle SmartView 32-bit for Office has been Sucessfully Installed .' -ButtonRightText 'OK' -Icon Information -NoWait }
}
ElseIf ($deploymentType -ieq 'Uninstall')
{
	##*===============================================
	##* PRE-UNINSTALLATION
	##*===============================================
	[string]$installPhase = 'Pre-Uninstallation'
	
	## Show Welcome Message, close Internet Explorer with a 60 second countdown before automatically closing
	Show-InstallationWelcome -CloseApps 'excel=Microsoft Office Excel' -CloseAppsCountdown 600
	
	## Show Progress Message (with the default message)
	Show-InstallationProgress "Uninstalling $appVendor $appName $appVersion "
	
	## &lt;Perform Pre-Uninstallation tasks here&gt;
	
	
	##*===============================================
	##* UNINSTALLATION
	##*===============================================
	[string]$installPhase = 'Uninstallation'
	
	## Handle Zero-Config MSI Uninstallations
	If ($useDefaultMsi) { Execute-MSI -Action 'Uninstall' -Path $defaultMsiFile }
	Execute-MSI -Action Uninstall -Path '{9E414AEB-8A1B-4123-835D-B6E614730CC0}'
	
	# &lt;Perform Uninstallation tasks here&gt;
	
	
	##*===============================================
	##* POST-UNINSTALLATION
	##*===============================================
	[string]$installPhase = 'Post-Uninstallation'
	
	## &lt;Perform Post-Uninstallation tasks here&gt;
	
	
}

##*===============================================
##* END SCRIPT BODY
##*===============================================

## Call the Exit-Script function to perform final cleanup operations
Exit-Script -ExitCode $mainExitCode

}
Catch {
[int32]$mainExitCode = 60001
[string]$mainErrorMessage = “$(Resolve-Error)”
Write-Log -Message $mainErrorMessage -Severity 3 -Source $deployAppScriptFriendlyName
Show-DialogBox -Text $mainErrorMessage -Icon ‘Stop’
Exit-Script -ExitCode $mainExitCode
}`

cory · July 9, 2015, 6:06pm

If you set Installation Program to:
POWERSHELL.exe -File .\Deploy-Application.ps1 -DeploymentType “Install”
Instead of
Deploy-Application.exe -DeploymentType “Install”

Why would this work and not with EXE?

julius · July 15, 2015, 1:38pm

Bummer this forum breaks pasted code.
Can you upload your .PS1 somewhere (like OneDrive) so we can review?

Where is this failing in SCCM?

During an OSD Task Sequence? During some other type of Task Sequence? During a normal application deployment? During a normal program deployment

We’ll need logs like

smsts.log (if applicable) appdiscovery.log appenforce.log appintenteval.log Can you upload your logs somewhere (like OneDrive) so we can review?

Topic		Replies	Views
Successful installation but app not installed General Discussion	1	1003	May 5, 2017
Adobe Reader DC - with registry settings for all users. Silent Install Complete Deployment Scripts	5	7328	April 21, 2016
Adobe Flash Player 18 -with clean up of old versions. Complete Deployment Scripts	2	1908	August 31, 2015
Deploy-Application.exe (v3.6.7) does not run with most parameters General Discussion	2	3681	October 25, 2015
Deploying software to a list of computers from a text file or a certain OU in AD General Discussion	1	1179	April 20, 2016

Script Works when run manually but SCCM Keeps Failing

Related topics