Hello,
I have packaged software with PSADT using Master Wrapper and the install portion works great. I am however having some issues with the uninstall portion. It is calling my correct argumentlist for the installer but I am getting the pre-action pop ups for pre-installation instead of pre-uninstallation.
I am using PSADT v4.1.5. Not sure what I'm doing wrong.
It would be helpful to see at least some of your code as we're all guessing what is wrong
Absolutely. Here is the complete script:
<#
.SYNOPSIS
PSAppDeployToolkit - This script performs the installation or uninstallation of an application(s).
.DESCRIPTION
- The script is provided as a template to perform an install, uninstall, or repair of an application(s).
- The script either performs an "Install", "Uninstall", or "Repair" deployment type.
- The install deployment type is broken down into 3 main sections/phases: Pre-Install, Install, and Post-Install.
The script imports the PSAppDeployToolkit module which contains the logic and functions required to install or uninstall an application.
.PARAMETER DeploymentType
The type of deployment to perform.
.PARAMETER DeployMode
Specifies whether the installation should be run in Interactive (shows dialogs), Silent (no dialogs), NonInteractive (dialogs without prompts) mode, or Auto (shows dialogs if a user is logged on, device is not in the OOBE, and there's no running apps to close).
Silent mode is automatically set if it is detected that the process is not user interactive, no users are logged on, the device is in Autopilot mode, or there's specified processes to close that are currently running.
.PARAMETER SuppressRebootPassThru
Suppresses the 3010 return code (requires restart) from being passed back to the parent process (e.g. SCCM) if detected from an installation. If 3010 is passed back to SCCM, a reboot prompt will be triggered.
.PARAMETER TerminalServerMode
Changes to "user install mode" and back to "user execute mode" for installing/uninstalling applications for Remote Desktop Session Hosts/Citrix servers.
.PARAMETER DisableLogging
Disables logging to file for the script.
.EXAMPLE
powershell.exe -File Invoke-AppDeployToolkit.ps1
.EXAMPLE
powershell.exe -File Invoke-AppDeployToolkit.ps1 -DeployMode Silent
.EXAMPLE
powershell.exe -File Invoke-AppDeployToolkit.ps1 -DeploymentType Uninstall
.EXAMPLE
Invoke-AppDeployToolkit.exe -DeploymentType Install -DeployMode Silent
.INPUTS
None. You cannot pipe objects to this script.
.OUTPUTS
None. This script does not generate any output.
.NOTES
Toolkit Exit Code Ranges:
- 60000 - 68999: Reserved for built-in exit codes in Invoke-AppDeployToolkit.ps1, and Invoke-AppDeployToolkit.exe
- 69000 - 69999: Recommended for user customized exit codes in Invoke-AppDeployToolkit.ps1
- 70000 - 79999: Recommended for user customized exit codes in PSAppDeployToolkit.Extensions module.
.LINK
https://psappdeploytoolkit.com
#>
[CmdletBinding()]
param
(
# Default is 'Install'.
[Parameter(Mandatory = $false)]
[ValidateSet('Install', 'Uninstall', 'Repair')]
[System.String]$DeploymentType,
# Default is 'Auto'. Don't hard-code this unless required.
[Parameter(Mandatory = $false)]
[ValidateSet('Auto', 'Interactive', 'NonInteractive', 'Silent')]
[System.String]$DeployMode = 'Interactive',
[Parameter(Mandatory = $false)]
[System.Management.Automation.SwitchParameter]$SuppressRebootPassThru = $true,
[Parameter(Mandatory = $false)]
[System.Management.Automation.SwitchParameter]$TerminalServerMode,
[Parameter(Mandatory = $false)]
[System.Management.Automation.SwitchParameter]$DisableLogging
)
##================================================
## MARK: Variables
##================================================
# Zero-Config MSI support is provided when "AppName" is null or empty.
# By setting the "AppName" property, Zero-Config MSI will be disabled.
$adtSession = @{
# App variables.
AppVendor = 'Citrix Systems'
AppName = 'Citrix Workspace'
AppVersion = '25.7.1'
AppArch = 'x86'
AppLang = 'EN'
AppRevision = '01'
AppSuccessExitCodes = @(0)
AppRebootExitCodes = @(1641, 3010)
AppProcessesToClose = "SelfService" # Example: @('excel', @{ Name = 'winword'; Description = 'Microsoft Word' })
AppScriptVersion = '1.0.0'
AppScriptDate = '10/23/2025'
AppScriptAuthor = 'Citrix'
RequireAdmin = $true
# Install Titles (Only set here to override defaults set by the toolkit).
InstallName = ''
InstallTitle = ''
# Script variables.
DeployAppScriptFriendlyName = $MyInvocation.MyCommand.Name
DeployAppScriptParameters = $PSBoundParameters
DeployAppScriptVersion = '4.1.5'
NoSessionDetection = $true
NoOobeDetection = $true
}
function Install-ADTDeployment
{
[CmdletBinding()]
param
(
)
##================================================
## MARK: Pre-Install
##================================================
$adtSession.InstallPhase = "Pre-$($adtSession.DeploymentType)"
Show-ADTInstallationWelcome -CloseProcesses $adtSession.AppProcessesToClose -AllowDefer -DeferTimes 5 -CloseProcessesCountdown 84000 -MinimizeWindows
Show-ADTInstallationProgress
##================================================
## MARK: Install
##================================================
$adtSession.InstallPhase = $adtSession.DeploymentType
Start-ADTProcess -FilePath 'CitrixWorkspaceFullInstaller.exe' -ArgumentList "/forceinstall /silent"
##================================================
## MARK: Post-Install
##================================================
$adtSession.InstallPhase = "Post-$($adtSession.DeploymentType)"
Show-ADTInstallationPrompt -Message "Citrix Workspace has been successfully installed. You can now launch your application." -ButtonMiddleText 'Ok'
## Master Wrapper detection
Set-ADTRegistryKey -Key "HKLM\SOFTWARE\InstalledApps\Citrix Systems_Citrix Workspace_25.7.1"
}
function Uninstall-ADTDeployment
{
[CmdletBinding()]
param
(
)
##================================================
## MARK: Pre-Uninstall
##================================================
$adtSession.InstallPhase = "Pre-$($adtSession.DeploymentType)"
Show-ADTInstallationProgress
##================================================
## MARK: Uninstall
##================================================
$adtSession.InstallPhase = $adtSession.DeploymentType
Start-ADTProcess -FilePath 'CitrixWorkspaceFullInstaller.exe' -ArgumentList "/uninstall /silent"
##================================================
## MARK: Post-Uninstallation
##================================================
$adtSession.InstallPhase = "Post-$($adtSession.DeploymentType)"
Show-ADTInstallationPrompt -Message "Citrix Workspace has been successfully removed." -ButtonMiddleText 'Ok'
## Master Wrapper detection
Remove-ADTRegistryKey -Key "HKLM\SOFTWARE\InstalledApps\Citrix Systems_Citrix Workspace_25.7.1"
}
function Repair-ADTDeployment
{
[CmdletBinding()]
param
(
)
##================================================
## MARK: Pre-Repair
##================================================
$adtSession.InstallPhase = "Pre-$($adtSession.DeploymentType)"
##================================================
## MARK: Repair
##================================================
$adtSession.InstallPhase = $adtSession.DeploymentType
##================================================
## MARK: Post-Repair
##================================================
$adtSession.InstallPhase = "Post-$($adtSession.DeploymentType)"
## Master Wrapper detection
Set-ADTRegistryKey -Key "HKLM\SOFTWARE\InstalledApps\Citrix Systems_Citrix Workspace_25.7.1"
}
##================================================
## MARK: Initialization
##================================================
# Set strict error handling across entire operation.
$ErrorActionPreference = [System.Management.Automation.ActionPreference]::Stop
$ProgressPreference = [System.Management.Automation.ActionPreference]::SilentlyContinue
Set-StrictMode -Version 1
# Import the module and instantiate a new session.
try
{
# Import the module locally if available, otherwise try to find it from PSModulePath.
if (Test-Path -LiteralPath "$PSScriptRoot\PSAppDeployToolkit\PSAppDeployToolkit.psd1" -PathType Leaf)
{
Get-ChildItem -LiteralPath "$PSScriptRoot\PSAppDeployToolkit" -Recurse -File | Unblock-File -ErrorAction Ignore
Import-Module -FullyQualifiedName @{ ModuleName = "$PSScriptRoot\PSAppDeployToolkit\PSAppDeployToolkit.psd1"; Guid = '8c3c366b-8606-4576-9f2d-4051144f7ca2'; ModuleVersion = '4.1.5' } -Force
}
else
{
Import-Module -FullyQualifiedName @{ ModuleName = 'PSAppDeployToolkit'; Guid = '8c3c366b-8606-4576-9f2d-4051144f7ca2'; ModuleVersion = '4.1.5' } -Force
}
# Open a new deployment session, replacing $adtSession with a DeploymentSession.
$iadtParams = Get-ADTBoundParametersAndDefaultValues -Invocation $MyInvocation
$adtSession = Remove-ADTHashtableNullOrEmptyValues -Hashtable $adtSession
$adtSession = Open-ADTSession @adtSession @iadtParams -PassThru
}
catch
{
$Host.UI.WriteErrorLine((Out-String -InputObject $_ -Width ([System.Int32]::MaxValue)))
exit 60008
}
##================================================
## MARK: Invocation
##================================================
# Commence the actual deployment operation.
try
{
# Import any found extensions before proceeding with the deployment.
Get-ChildItem -LiteralPath $PSScriptRoot -Directory | & {
process
{
if ($_.Name -match 'PSAppDeployToolkit\..+$')
{
Get-ChildItem -LiteralPath $_.FullName -Recurse -File | Unblock-File -ErrorAction Ignore
Import-Module -Name $_.FullName -Force
}
}
}
# Invoke the deployment and close out the session.
& "$($adtSession.DeploymentType)-ADTDeployment"
Close-ADTSession
}
catch
{
# An unhandled error has been caught.
$mainErrorMessage = "An unhandled error within [$($MyInvocation.MyCommand.Name)] has occurred.`n$(Resolve-ADTErrorRecord -ErrorRecord $_)"
Write-ADTLogEntry -Message $mainErrorMessage -Severity 3
## Error details hidden from the user by default. Show a simple dialog with full stack trace:
# Show-ADTDialogBox -Text $mainErrorMessage -Icon Stop -NoWait
## Or, a themed dialog with basic error message:
# Show-ADTInstallationPrompt -Message "$($adtSession.DeploymentType) failed at line $($_.InvocationInfo.ScriptLineNumber), char $($_.InvocationInfo.OffsetInLine):`n$($_.InvocationInfo.Line.Trim())`n`nMessage:`n$($_.Exception.Message)" -MessageAlignment Left -ButtonRightText OK -Icon Error -NoWait
Close-ADTSession -ExitCode 60001
}
I have deployed it through both Intune and SCCM with the install and uninstall parameters both calling the "invoke-AppDeployToolkit.exe".
do you use different commands to launch invoke-AppDeployToolkit.exe?
No. I just set it for both the install and uninstall. I guess I just assumed it would know whether it was being called to install or uninstall. This is my first PSADT deployment.
look here: How to Deploy · PSAppDeployToolkit
Thanks. Adding a -DeploymentType Uninstall did the trick.